connect/setup delay

Canadianbones · 07-08-2009, 05:01 PM

Hello all,

I used to suffer from a 20-30 second delay when I tried to connect to a server or enter setup, the only solution was to disconnect my G15 keyboard and reconnect, well after a format the problem went away, recently I installed Cyberlink Powercinema 6 and the problem returned, so I uninstalled it and its gone away, I know others have posted about this same problem so I figured I would post my finding and hope that it can be tested/confirmed by anyone else with the same problem.

magus424 · 07-11-2009, 06:05 AM

PowerDVD (also by Cyberlink) can cause this exact same issue - I've been looking for a fix for this for days until I found this post, and I had vista + powerdvd + g15 causing this - when I uninstalled PowerDVD, the freezing disappeared.

JustinCaw · 02-10-2010, 11:46 PM

Hey, I have the exact same problem. I also have a g15 and was wondering if you could tell me how you managed to fix the problem. Any help would be wonderful

tattnall1948 · 02-14-2010, 05:32 AM

thats interresting im having this excate problem when i connect to servers and also have a g15 , but i also have about a 1 minute lockup when i launch the setup tab , do my thing in setup then close it and have another 1 min lockup then things are fine.

Canadianbones · 02-24-2010, 07:53 AM

are you using a Cyberlink product to watch tv or dvds? if so uninstalling it stopped the delay problems I was experiencing or unplug the G15 and plug it back in before starting Vent.

zur1234 · 03-20-2010, 08:09 PM

Cyberlink definetely has some conflicts with Ventrilo.

I have a new Dell with Cyberlink installed, I uninstalled it and all the VT delay problems went away.

ochimo · 03-22-2010, 07:56 PM

Uninstalling powerdvd isnt really an option is there some sort of compaitibity issue that I can correct?

jerm3993 · 04-26-2010, 10:06 PM

yeah I cant really un install cyberlink either because I have a laptop and as far as I know thats how I use my webcam so is there any other way?

Canadianbones · 05-01-2010, 12:53 PM

what cyberlink program are you using, might be a different program that will do the same thing.

lmundi · 05-15-2010, 02:16 AM

Wow, I had Power DVD, uninstalled it and I can log in and out of Vent without laggin or disconnects.

07-08-2009, 05:01 PM	#1
Canadianbones Junior Member Join Date: Jun 2008 Posts: 20	connect/setup delay Hello all, I used to suffer from a 20-30 second delay when I tried to connect to a server or enter setup, the only solution was to disconnect my G15 keyboard and reconnect, well after a format the problem went away, recently I installed Cyberlink Powercinema 6 and the problem returned, so I uninstalled it and its gone away, I know others have posted about this same problem so I figured I would post my finding and hope that it can be tested/confirmed by anyone else with the same problem.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2009, 06:05 AM	#2
magus424 Junior Member Join Date: Jul 2009 Posts: 1	PowerDVD (also by Cyberlink) can cause this exact same issue - I've been looking for a fix for this for days until I found this post, and I had vista + powerdvd + g15 causing this - when I uninstalled PowerDVD, the freezing disappeared.

02-10-2010, 11:46 PM	#3
JustinCaw Junior Member Join Date: Feb 2010 Posts: 1	Hey, I have the exact same problem. I also have a g15 and was wondering if you could tell me how you managed to fix the problem. Any help would be wonderful

02-14-2010, 05:32 AM	#4
tattnall1948 Junior Member Join Date: Feb 2010 Posts: 2	thats interresting im having this excate problem when i connect to servers and also have a g15 , but i also have about a 1 minute lockup when i launch the setup tab , do my thing in setup then close it and have another 1 min lockup then things are fine.

02-24-2010, 07:53 AM	#5
Canadianbones Junior Member Join Date: Jun 2008 Posts: 20	are you using a Cyberlink product to watch tv or dvds? if so uninstalling it stopped the delay problems I was experiencing or unplug the G15 and plug it back in before starting Vent.

03-20-2010, 08:09 PM	#6
zur1234 Junior Member Join Date: Mar 2010 Posts: 1	Cyberlink definetely has some conflicts with Ventrilo. I have a new Dell with Cyberlink installed, I uninstalled it and all the VT delay problems went away.

03-22-2010, 07:56 PM	#7
ochimo Junior Member Join Date: Nov 2006 Posts: 1	Uninstalling powerdvd isnt really an option is there some sort of compaitibity issue that I can correct?

04-26-2010, 10:06 PM	#8
jerm3993 Junior Member Join Date: Apr 2010 Posts: 2	yeah I cant really un install cyberlink either because I have a laptop and as far as I know thats how I use my webcam so is there any other way?

05-01-2010, 12:53 PM	#9
Canadianbones Junior Member Join Date: Jun 2008 Posts: 20	what cyberlink program are you using, might be a different program that will do the same thing.

05-15-2010, 02:16 AM	#10
lmundi Junior Member Join Date: Jun 2009 Posts: 3	Wow, I had Power DVD, uninstalled it and I can log in and out of Vent without laggin or disconnects.