PHP Status Scripts

FatBoyXPC · 04-06-2008, 02:27 PM

I have a question about these lines of the readme:

Be advised that if your web/php server is running Linux then
you must install the Linux version of the ventrilo_status
program. Likewise, if your web server is running Windows
then you must install the Windows version of the
ventrilo_status.exe program. The same goes for all of the
other supported server platforms. Installing the windows
ventrilo_status.exe program on a Linux machine will not work
no matter how hard you try.

Now I could use either a linux or windows web server, but I cannot find the ventrilo_statux.exe program on ventrilo's website. With version 3.0 was this changed so you don't need the exe file anymore?

Flagship · 04-06-2008, 04:34 PM

Comes with the windows version of the server.

FatBoyXPC · 04-06-2008, 04:52 PM

My vent server is on a linux box, same deal?

Nevermind, I didn't realize what you were saying. Alright so I could get to a windows web server if I really had to, but are there any linux versions of ventrilo_status programs? I have the "ventrilo scripts" file off the downloads section, but not quite sure what those are for.

Nevermind, again, I downloaded the linux server version, there was the ventrilo status.

FatBoyXPC · 04-06-2008, 09:56 PM

Actually another question --

Using the status scripts on the ventrilo website, it says:

CVentriloStatus->Request() failed. No response from server

But using another website, using same IP and port, I can remote status it (using their prebuilt scripts, but I'd have to use their php page with their advertising on it etc), it works just fine. Some of these sites include instantventrilo.com and ventrilolive.com.

FatBoyXPC · 04-07-2008, 11:55 AM

bump

FatBoyXPC · 04-08-2008, 02:32 PM

Another bump

Ur-Jack · 04-09-2008, 02:17 PM

It could be your webserver is firewalled (not uncommon) and blocking the inbound UDP connection from the ventrilo server. Bang off a correspondence with your web providor ask them if they can create a rule in the firewall to allow incoming UDP from the IP of your ventrilo server on the port that it uses - some providors do (mine did after a little persuasion).

04-06-2008, 02:27 PM	#1
FatBoyXPC Member Join Date: Nov 2007 Posts: 33	PHP Status Scripts I have a question about these lines of the readme: Be advised that if your web/php server is running Linux then you must install the Linux version of the ventrilo_status program. Likewise, if your web server is running Windows then you must install the Windows version of the ventrilo_status.exe program. The same goes for all of the other supported server platforms. Installing the windows ventrilo_status.exe program on a Linux machine will not work no matter how hard you try. Now I could use either a linux or windows web server, but I cannot find the ventrilo_statux.exe program on ventrilo's website. With version 3.0 was this changed so you don't need the exe file anymore?

04-06-2008, 04:34 PM	#2
Flagship Administrator Join Date: May 2005 Location: Some insignifcant planet. Posts: 8,058	Comes with the windows version of the server. __________________ Flagship Industries, Inc. www.ventrilo.com

04-06-2008, 04:52 PM	#3
FatBoyXPC Member Join Date: Nov 2007 Posts: 33	My vent server is on a linux box, same deal? Nevermind, I didn't realize what you were saying. Alright so I could get to a windows web server if I really had to, but are there any linux versions of ventrilo_status programs? I have the "ventrilo scripts" file off the downloads section, but not quite sure what those are for. Nevermind, again, I downloaded the linux server version, there was the ventrilo status. Last edited by FatBoyXPC; 04-06-2008 at 06:43 PM.

04-06-2008, 09:56 PM	#4
FatBoyXPC Member Join Date: Nov 2007 Posts: 33	Actually another question -- Using the status scripts on the ventrilo website, it says: CVentriloStatus->Request() failed. No response from server But using another website, using same IP and port, I can remote status it (using their prebuilt scripts, but I'd have to use their php page with their advertising on it etc), it works just fine. Some of these sites include instantventrilo.com and ventrilolive.com. Last edited by FatBoyXPC; 04-06-2008 at 10:26 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-07-2008, 11:55 AM	#5
FatBoyXPC Member Join Date: Nov 2007 Posts: 33	bump

04-08-2008, 02:32 PM	#6
FatBoyXPC Member Join Date: Nov 2007 Posts: 33	Another bump

04-09-2008, 02:17 PM	#7
Ur-Jack Senior Member Join Date: Jun 2005 Posts: 327	It could be your webserver is firewalled (not uncommon) and blocking the inbound UDP connection from the ventrilo server. Bang off a correspondence with your web providor ask them if they can create a rule in the firewall to allow incoming UDP from the IP of your ventrilo server on the port that it uses - some providors do (mine did after a little persuasion).