Stupid question

sedoclat · 03-30-2007, 03:02 PM

I just installed the mac vent client, and am as a rule clueless on computer programs.

Heres the problem: I can't speak. I set a push-to-talk hotkey, but when I press it nothing happens. I checked to see if "enable access for assistive devices" is on, (it is), and I can hear other people just fine.

What am I doing wrong?

wadesworld · 03-30-2007, 07:21 PM

What key are you using?

sedoclat · 03-30-2007, 09:44 PM

I dont know, and I dont know. How do I set my mixer, and how do I find out what key Im using?

wadesworld · 03-31-2007, 01:01 AM

There are no mixer/mux/line settings in the Mac version.

The is a sound input setting and you should have that set to the appropriate device as well as having the system sound preference pane set to the appropriate device in the Input pane.

The hotkey is set in the Ventrilo setup dialog. Make sure that "Enable outgoing voice communication is on, as well as "Use push-to-talk hotkey". Then make sure the correct key is mapped in the Hotkey field. When things are correctly done, your little speaker icon should turn green when you're connected to a Speex-configured server and press your hotkey.

sedoclat · 03-31-2007, 10:40 AM

Input has only one option: default. In system preferences, the microphone dropdown box is grayed out.

I'm using a mini, which has no place to plug the microphone into on the computer itself. I'm using a seperate device that allows me to switch between speakers and headphones without changing plugs, and it also has a slot for the microphone, which is where mine is plugged into. Could this be the problem?

mjgraf · 03-31-2007, 07:06 PM

depends on what this device is. the mac mini requires a usb mic or a device that converts an analog mic to the USB connection.

sedoclat · 03-31-2007, 08:38 PM

The device plugs directly into the sound jack. I'll get a USB microphone, then.

03-30-2007, 03:02 PM	#1
sedoclat Junior Member Join Date: Mar 2007 Posts: 4	Stupid question I just installed the mac vent client, and am as a rule clueless on computer programs. Heres the problem: I can't speak. I set a push-to-talk hotkey, but when I press it nothing happens. I checked to see if "enable access for assistive devices" is on, (it is), and I can hear other people just fine. What am I doing wrong?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2007, 07:21 PM	#2
wadesworld Senior Member Join Date: Nov 2005 Posts: 2,934	What key are you using?

03-30-2007, 09:44 PM	#3
sedoclat Junior Member Join Date: Mar 2007 Posts: 4	I dont know, and I dont know. How do I set my mixer, and how do I find out what key Im using?

03-31-2007, 01:01 AM	#4
wadesworld Senior Member Join Date: Nov 2005 Posts: 2,934	There are no mixer/mux/line settings in the Mac version. The is a sound input setting and you should have that set to the appropriate device as well as having the system sound preference pane set to the appropriate device in the Input pane. The hotkey is set in the Ventrilo setup dialog. Make sure that "Enable outgoing voice communication is on, as well as "Use push-to-talk hotkey". Then make sure the correct key is mapped in the Hotkey field. When things are correctly done, your little speaker icon should turn green when you're connected to a Speex-configured server and press your hotkey.

03-31-2007, 10:40 AM	#5
sedoclat Junior Member Join Date: Mar 2007 Posts: 4	Input has only one option: default. In system preferences, the microphone dropdown box is grayed out. I'm using a mini, which has no place to plug the microphone into on the computer itself. I'm using a seperate device that allows me to switch between speakers and headphones without changing plugs, and it also has a slot for the microphone, which is where mine is plugged into. Could this be the problem?

03-31-2007, 07:06 PM	#6
mjgraf Senior Member Join Date: May 2005 Location: Some say in my own little world Posts: 15,502	depends on what this device is. the mac mini requires a usb mic or a device that converts an analog mic to the USB connection.

03-31-2007, 08:38 PM	#7
sedoclat Junior Member Join Date: Mar 2007 Posts: 4	The device plugs directly into the sound jack. I'll get a USB microphone, then.