I can't seem to speak with my LogiTech USB headset

melony · 08-13-2006, 11:16 AM

And even the default mic Stupid thing doesn't seem to be working, i've tried removing it and re-downloading it but i still can't speak. The speaking itself on vent works but no one can hear me, can anyone help?

Also when i do monitor, it goes like this:

0
0
0
Begin:
0
0
0
0
(here is where i start to speak but still 0)
0
0
0
0
0
0
0
0
0
End

And that's it. Any help?

mjgraf · 08-13-2006, 03:53 PM

most like line volume issue.
set the mixer to none
input device to your headset
click Recording (Input)
then adjust the mic line volume
ensure that the amplifiers are set to zero.

melony · 08-13-2006, 05:20 PM

Quote:

Originally Posted by mjgraf

most like line volume issue.
set the mixer to none
input device to your headset
click Recording (Input)
then adjust the mic line volume
ensure that the amplifiers are set to zero.

Right,

1. What is the "mixer"

2. By recording you mean monitor/test?

thanks again though.

mjgraf · 08-13-2006, 07:47 PM

forgot i was in the MAC forum when posting this.
the Test will not work, [url]http://ventrilo.com/forums/showthread.php?t=9534[/url]

is the headset listed as an input device?

melony · 08-13-2006, 07:52 PM

Yes it is, and when i do monitor it is constantly at 0. Except when i use my computer's built-in Mic, it seem's to work.

Mythril · 08-15-2006, 03:52 PM

I encounter a similar problem, but have found a way that works for me.
When I plug in my headset, I give it a little bit of time to sync up with the system. If I launch Ventrillo to quickly after plugging in the headset, it will not be recognized - the same goes if I plug in my headset while Ventrillo is open.

Flagship · 08-15-2006, 04:31 PM

Yes, the Mac client is not dynamic about sound devices. It will only use what it sees when it is launched.

USB devices do take several seconds to sync with the OS as well. Even windows has that problem.

08-13-2006, 11:16 AM	#1
melony Junior Member Join Date: Aug 2006 Posts: 3	I can't seem to speak with my LogiTech USB headset And even the default mic Stupid thing doesn't seem to be working, i've tried removing it and re-downloading it but i still can't speak. The speaking itself on vent works but no one can hear me, can anyone help? Also when i do monitor, it goes like this: 0 0 0 Begin: 0 0 0 0 (here is where i start to speak but still 0) 0 0 0 0 0 0 0 0 0 End And that's it. Any help? Last edited by melony; 08-13-2006 at 12:18 PM.

08-13-2006, 07:52 PM	#5
melony Junior Member Join Date: Aug 2006 Posts: 3	Yes Yes it is, and when i do monitor it is constantly at 0. Except when i use my computer's built-in Mic, it seem's to work.

08-15-2006, 04:31 PM	#7
Flagship Administrator Join Date: May 2005 Location: Some insignifcant planet. Posts: 8,059	Yes, the Mac client is not dynamic about sound devices. It will only use what it sees when it is launched. USB devices do take several seconds to sync with the OS as well. Even windows has that problem. __________________ Flagship Industries, Inc. www.ventrilo.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-13-2006, 03:53 PM	#2
mjgraf Senior Member Join Date: May 2005 Location: Some say in my own little world Posts: 15,502	most like line volume issue. set the mixer to none input device to your headset click Recording (Input) then adjust the mic line volume ensure that the amplifiers are set to zero.

08-13-2006, 07:47 PM	#4
mjgraf Senior Member Join Date: May 2005 Location: Some say in my own little world Posts: 15,502	forgot i was in the MAC forum when posting this. the Test will not work, [url]http://ventrilo.com/forums/showthread.php?t=9534[/url] is the headset listed as an input device?

08-15-2006, 03:52 PM	#6
Mythril Junior Member Join Date: Aug 2006 Posts: 1	I encounter a similar problem, but have found a way that works for me. When I plug in my headset, I give it a little bit of time to sync up with the system. If I launch Ventrillo to quickly after plugging in the headset, it will not be recognized - the same goes if I plug in my headset while Ventrillo is open.