![]() |
![]() |
#1 |
Junior Member
Join Date: Jul 2005
Posts: 3
|
![]()
Hi, i have got my vent server to work.. but there is a very big delay in the voice. It is about 10 to 20 seconds delay.. I have forwarded the 8767 port. And i get about 7000-10000 ping...... but my friend got about 16 ping
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2005
Location: Connecticut
Posts: 286
|
![]()
The correct port for Ventrilo should be 3784.. Your thinking of another voip program..
![]() Is this a server running on your home PC or on a dedicated machine rented or colo'd? |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Jul 2005
Posts: 3
|
![]()
Oh, oops i meant 3784 hehe.. and im running it on my home pc. Everyone can connect, its just alot of delay
I was thinking of teamspeak when i said the other port sorry |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Nov 2005
Posts: 2
|
![]()
I have the default port setup on the server, i am the admin, and the ping that all my buddies get are in the 125-215 range, and i have 0 ping naturally. it used to work fine until a day ago, and now all of a sudden there is a delay in the voice from the other users. i cannot figure it out. can anyone help me with this issue also??
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jun 2005
Location: Connecticut
Posts: 286
|
![]()
Most likely the problem is you are overloading the connection.
You might also check the codec for the server and try lowering it. You may have it set to high which will cause the delay and skipping. |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Jul 2005
Posts: 3
|
![]()
VoiceCodec=0
VoiceFormat=1 thats what i have in the ini file |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jun 2005
Posts: 144
|
![]()
GSM 22khz. Depending on your network connection it should be able to handle it. 384+ should be ok, but since your having issues I would assume you dont have that or its not stable enough to handle it. You do have the option of killing your sound quality & going to the GSM 11Khz codec which should resolve your bandwidth issue. You can also go to a speex codec. Test out your codecs until you find one that will work for your connection.
Your other option is to buy a server from a server provider. This would stop any problems your having. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|