Robotic Voice

Prog-Rocker · 04-25-2011, 02:23 PM

@ pyrah

what version of windows and vent are you running? are they 32 or 64 bit

have you setup vent as described here:

[URL]http://forum.ventrilo.com/showthread.php?t=43879[/URL]

are your drivers up to date:

[FONT=Verdana]Check the Audio driver to make sure it is up to date. Or try re-installing the current driver.[/FONT]
[FONT=Verdana](note: some USB Headsets do not require a driver)[/FONT]
[FONT=Verdana](Don’t assume the driver is up to date as a newer one may have been released since the computer was built)[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]- If you have a brand-name PC, like Dell or HP, then check the manufacturers website for driver updates.[/FONT]
[FONT=Verdana]- If you built the PC and use the on-board sound device then check the motherboard manufacturers website for drivers for your model motherboard.[/FONT]
[FONT=Verdana]- If you use a plug-in soundcard, ex: SoundBlaster, then check that manufacturers website for drivers.[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Also check for BIOS and chipset updates[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]When checking for BIOS, chipset and certain onboard hardware drivers, you should only check the pc (or specific motherboard) manufacturers website for your make/model. The manufacturer is responsible for maintaining the proper version of driver for their specific hardware.[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]For example: Realtek is an OEM manufacturer of audio chips and there are many different revisions of each. The latest driver found on the Realtek site may not be compatible with the version of chip in your pc, and could cause problems like 'stereo mix' to not be available. Realtek comments to this effect on their download page.[/FONT]
[FONT=Verdana] [/FONT]
can you post the output from dxdiag plz

[FONT=Verdana]Start > Run[/FONT]
[FONT=Verdana]Dxdiag[/FONT]
[FONT=Verdana]Click the 'Save All' button[/FONT]
[FONT=Verdana]File is saved to the desktop as "DxDiag.txt"[/FONT]
[FONT=Verdana]Copy/paste the information to the forum. The information will have to be separated into multiple posts due to the maximum character limitation.[/FONT]
[FONT=Verdana][/FONT]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

04-25-2011, 02:23 PM	#13
Prog-Rocker just tryin to help Join Date: Jul 2006 Location: Local Space/Time Continuum Posts: 23,460	@ pyrah what version of windows and vent are you running? are they 32 or 64 bit have you setup vent as described here: [URL]http://forum.ventrilo.com/showthread.php?t=43879[/URL] are your drivers up to date: [FONT=Verdana]Check the Audio driver to make sure it is up to date. Or try re-installing the current driver.[/FONT] [FONT=Verdana](note: some USB Headsets do not require a driver)[/FONT] [FONT=Verdana](Don’t assume the driver is up to date as a newer one may have been released since the computer was built)[/FONT] [FONT=Verdana] [/FONT] [FONT=Verdana]- If you have a brand-name PC, like Dell or HP, then check the manufacturers website for driver updates.[/FONT] [FONT=Verdana]- If you built the PC and use the on-board sound device then check the motherboard manufacturers website for drivers for your model motherboard.[/FONT] [FONT=Verdana]- If you use a plug-in soundcard, ex: SoundBlaster, then check that manufacturers website for drivers.[/FONT] [FONT=Verdana] [/FONT] [FONT=Verdana]Also check for BIOS and chipset updates[/FONT] [FONT=Verdana] [/FONT] [FONT=Verdana]When checking for BIOS, chipset and certain onboard hardware drivers, you should only check the pc (or specific motherboard) manufacturers website for your make/model. The manufacturer is responsible for maintaining the proper version of driver for their specific hardware.[/FONT] [FONT=Verdana] [/FONT] [FONT=Verdana]For example: Realtek is an OEM manufacturer of audio chips and there are many different revisions of each. The latest driver found on the Realtek site may not be compatible with the version of chip in your pc, and could cause problems like 'stereo mix' to not be available. Realtek comments to this effect on their download page.[/FONT] [FONT=Verdana] [/FONT] can you post the output from dxdiag plz [FONT=Verdana]Start > Run[/FONT] [FONT=Verdana]Dxdiag[/FONT] [FONT=Verdana]Click the 'Save All' button[/FONT] [FONT=Verdana]File is saved to the desktop as "DxDiag.txt"[/FONT] [FONT=Verdana]Copy/paste the information to the forum. The information will have to be separated into multiple posts due to the maximum character limitation.[/FONT] [FONT=Verdana][/FONT]