Announce User (phonically)

jglazer · 05-25-2017, 01:53 PM

I know Vent has this ability but I cannot seem to get it to say "TOM HAS JOINED CHANNEL" when Tom joins the channel. I know there are settings in the user manager but I have no users there. Its a public server and no accounts are created.

Is there a way to set this up on a global basis?

Prog-Rocker · 05-25-2017, 03:12 PM

all TTS events are handled by your local OS TTS engine. make sure you have the vent event set correctly

goto setup > events tab > change 'users switch channels" to text-to-speech. clik the play button to test

the tts engine will attempt to pronounce the user name correctly. if it doesn't then the other user needs to set the proper phonetic in their client setup. goto 'user name' and enter the pronunciation in the phonetic box.

mariad · 06-20-2017, 05:56 AM

Thank you for the step guide. Will be helpful to me as well.

mariad · 06-29-2017, 08:20 AM

I followed the settings you mentioned. But most of the time it reverts back to the original issue. Any help on that.

Prog-Rocker · 06-29-2017, 01:18 PM

check for these settings too:

hilite channel > rt-clik > channel admin > info > disable sound events (unchecked)

client setup > binds/speech tabs > output device set same as voice tab. (all event sounds are sent to this device)

client setup > misc tab > uncheck 'silent connections when in a channel'

windows ctrl-panel > speech recognition > text-to speech link (on left side window) > test

sotheahy · 07-13-2017, 08:59 PM

I know there are settings in the user manager but I have no users there. Its a public server and no accounts are created.

[url=https://www.gclub-******.com/baccarat/]สูตรบาคาร่า[/url]

05-25-2017, 01:53 PM	#1
jglazer Junior Member Join Date: May 2017 Posts: 2	Announce User (phonically) I know Vent has this ability but I cannot seem to get it to say "TOM HAS JOINED CHANNEL" when Tom joins the channel. I know there are settings in the user manager but I have no users there. Its a public server and no accounts are created. Is there a way to set this up on a global basis?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-25-2017, 03:12 PM	#2
Prog-Rocker just tryin to help Join Date: Jul 2006 Location: Local Space/Time Continuum Posts: 23,460	all TTS events are handled by your local OS TTS engine. make sure you have the vent event set correctly goto setup > events tab > change 'users switch channels" to text-to-speech. clik the play button to test the tts engine will attempt to pronounce the user name correctly. if it doesn't then the other user needs to set the proper phonetic in their client setup. goto 'user name' and enter the pronunciation in the phonetic box.

06-20-2017, 05:56 AM	#3
mariad Member Join Date: Mar 2017 Posts: 31	Thank you for the step guide. Will be helpful to me as well.

06-29-2017, 08:20 AM	#4
mariad Member Join Date: Mar 2017 Posts: 31	I followed the settings you mentioned. But most of the time it reverts back to the original issue. Any help on that.

06-29-2017, 01:18 PM	#5
Prog-Rocker just tryin to help Join Date: Jul 2006 Location: Local Space/Time Continuum Posts: 23,460	check for these settings too: hilite channel > rt-clik > channel admin > info > disable sound events (unchecked) client setup > binds/speech tabs > output device set same as voice tab. (all event sounds are sent to this device) client setup > misc tab > uncheck 'silent connections when in a channel' windows ctrl-panel > speech recognition > text-to speech link (on left side window) > test

07-13-2017, 08:59 PM	#6
sotheahy Junior Member Join Date: Jul 2017 Posts: 3	I know there are settings in the user manager but I have no users there. Its a public server and no accounts are created. [url=https://www.gclub-******.com/baccarat/]สูตรบาคาร่า[/url]