setup button locking/crashing vent on vista

[jjamriska]

im having an issue with 2 of my vista machines. it locks up and then crashes out when i click on setup, windows details posted below. oddly, upon reinstall, it still had the server info entered in....

[FONT=Verdana]Does your system have the Bigfoot Killer Network Card installed? no[/FONT]

[FONT=Verdana]Try powering off the modem-router-pc (in that order) for at least 60 seconds each (this will clear all cached data) done[/FONT]

[FONT=Verdana]Try re-installing or updating the router firmware. Check the manufacturers website for your make/model recently done, there is a pc that doesnt have the issue[/FONT]

[FONT=Verdana]In Windows Network Properties, disable all un-used network card ports (some cards include both wired and wireless ports)[/FONT]
[FONT=Verdana]Windows Control-Panel / network and sharing / manage network connection / right-click on the device(s) that aren't used and select 'disable' DONE[/FONT]

[FONT=Verdana]In Windows Network Properties, try disabling QoS:[/FONT]
[FONT=Verdana]Windows Control-Panel / network and sharing / view status (link on right side) / properties / uncheck "QoS Packet Scheduler" [/FONT][FONT=Verdana]DONE[/FONT]

[FONT=Verdana]Temporarily disable all firewall/virus applications to test [/FONT][FONT=Verdana]DONE[/FONT]

There is no cyberlink software on my pc.

Description:
A problem caused this program to stop interacting with Windows.

Problem signature:
Problem Event Name: AppHangB1
Application Name: Ventrilo.exe
Application Version: 3.0.5.0
Application Timestamp: 49efce51
Hang Signature: e634
Hang Type: 2048
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Hang Signature 1: 79572d05b15c3478a7506eff3afec413
Additional Hang Signature 2: c68c
Additional Hang Signature 3: e7d2f6229e29cbd825097f59434d9b90
Additional Hang Signature 4: e634
Additional Hang Signature 5: 79572d05b15c3478a7506eff3afec413
Additional Hang Signature 6: c68c
Additional Hang Signature 7: e7d2f6229e29cbd825097f59434d9b90

[Prog-Rocker]

try holding down the left-control key while entering setup.

if this works then there is a possible problem with the audio driver

[FONT=Verdana]Audio Driver[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Check the Audio driver to make sure it is up to date. Or try re-installing the current driver.[/FONT]
[FONT=Verdana](note: some USB Headsets do not require a driver)[/FONT]
[FONT=Verdana](Don’t assume the driver is up to date as a newer one may have been released since the computer was built)[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]- If you have a brand-name PC, like Dell or HP, then check the manufacturers website for driver updates.[/FONT]
[FONT=Verdana]- If you built the PC and use the on-board sound device then check the motherboard manufacturers website for drivers for your model motherboard.[/FONT]
[FONT=Verdana]- If you use a plug-in soundcard, like SoundBlaster, then check that manufacturers website for drivers.[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Also check for BIOS and chipset updates[/FONT]
[FONT=Verdana][/FONT]
[FONT=Verdana]Starting From Scratch[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Write down your Username and Server information[/FONT]
[FONT=Verdana]exit vent
goto START/RUN and enter: %appdata%\ventrilo[/FONT]
[FONT=Verdana]right-click on [/FONT][FONT=Verdana]ventrilo2.ini[/FONT][FONT=Verdana] and select “Rename”
give the file a different name[/FONT]
[FONT=Verdana]or[/FONT]
[FONT=Verdana]delete the Ventrilo folder
restart vent[/FONT]
[FONT=Verdana]re-enter your username and server information[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana][/FONT]

[Canadianbones]

cyberlink software is sometimes relabeled by companies that are packaging it with their vid cards/sound cards, what dvd software is installed if any. are you using a logitech keyboard or a keyboard with multimedia functions on it. volume control, stop, play, fast forward, rewind. if so have you tried unplugging it and plugging it back in before hitting setup?