Ventrilo Tech Support  

Go Back   Ventrilo Tech Support > Main Category > Server

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-05-2008, 09:13 AM   #10
Junior Member
Join Date: Mar 2008
Location: St Cloud, MN
Posts: 3

Originally Posted by wfisher View Post
Still No dice. I have a static external IP through my ISP, so I know its not that problem and I have assigned the server running vent a static IP on my internal network (192.168.x.x).
It will help if all future posters did the following and posted results as part of the question:

1) Upon installing, open client on SAME machine and try to connect to server using (localhost). If you don't connect, uninstall, reboot, re-install, and make sure all your hardware is in working order.

2) If you DO connect, try client on other machine within your network and connect via a local address. (192.168.x.y)

3) If you're still good, retrieve your IP address from the link on the Ventrilo page and paste it into the Status link on the Ventrilo home page. Can it see you? If not, you've likely got a port or IP address problem. (BTW, make sure you also open port 6100 udp on the router for the server machine.)

Knowing those answers, and anything that happens in those steps will help the community solve your problem.
kilikopele is offline  

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 03:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.