setup button locking/crashing vent on vista

[jjamriska]

im having an issue with 2 of my vista machines. it locks up and then crashes out when i click on setup, windows details posted below. oddly, upon reinstall, it still had the server info entered in....

Does your system have the Bigfoot Killer Network Card installed? no

Try powering off the modem-router-pc (in that order) for at least 60 seconds each (this will clear all cached data) done

Try re-installing or updating the router firmware. Check the manufacturers website for your make/model recently done, there is a pc that doesnt have the issue

In Windows Network Properties, disable all un-used network card ports (some cards include both wired and wireless ports)
Windows Control-Panel / network and sharing / manage network connection / right-click on the device(s) that aren't used and select 'disable' DONE

In Windows Network Properties, try disabling QoS:
Windows Control-Panel / network and sharing / view status (link on right side) / properties / uncheck "QoS Packet Scheduler" DONE

Temporarily disable all firewall/virus applications to test DONE

There is no cyberlink software on my pc.

Description:
A problem caused this program to stop interacting with Windows.

Problem signature:
Problem Event Name: AppHangB1
Application Name: Ventrilo.exe
Application Version: 3.0.5.0
Application Timestamp: 49efce51
Hang Signature: e634
Hang Type: 2048
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Hang Signature 1: 79572d05b15c3478a7506eff3afec413
Additional Hang Signature 2: c68c
Additional Hang Signature 3: e7d2f6229e29cbd825097f59434d9b90
Additional Hang Signature 4: e634
Additional Hang Signature 5: 79572d05b15c3478a7506eff3afec413
Additional Hang Signature 6: c68c
Additional Hang Signature 7: e7d2f6229e29cbd825097f59434d9b90

[Prog-Rocker]

try holding down the left-control key while entering setup.

if this works then there is a possible problem with the audio driver

Audio Driver

Check the Audio driver to make sure it is up to date. Or try re-installing the current driver.
(note: some USB Headsets do not require a driver)
(Don’t assume the driver is up to date as a newer one may have been released since the computer was built)

- If you have a brand-name PC, like Dell or HP, then check the manufacturers website for driver updates.
- If you built the PC and use the on-board sound device then check the motherboard manufacturers website for drivers for your model motherboard.
- If you use a plug-in soundcard, like SoundBlaster, then check that manufacturers website for drivers.

Also check for BIOS and chipset updates

Starting From Scratch

Write down your Username and Server information
exit vent
goto START/RUN and enter: %appdata%\ventrilo
right-click on ventrilo2.ini and select “Rename”
give the file a different name
or
delete the Ventrilo folder
restart vent
re-enter your username and server information

[Canadianbones]

cyberlink software is sometimes relabeled by companies that are packaging it with their vid cards/sound cards, what dvd software is installed if any. are you using a logitech keyboard or a keyboard with multimedia functions on it. volume control, stop, play, fast forward, rewind. if so have you tried unplugging it and plugging it back in before hitting setup?