I have GigE and with the ventrilo client running I get the following using your commandline options.
I have a similar setup, server is running XP32bit, client I used is running Vista 32bit.
Connecting locally on the server, same with and without ventrilo running/connected
Code:
[1868] local 192.168.2.105 port 5001 connected with 192.168.2.105 port 3307
[1832] local 192.168.2.105 port 5001 connected with 192.168.2.105 port 3308
[ ID] Interval Transfer Bandwidth
[1868] 0.0-30.0 sec 1.45 GBytes 416 Mbits/sec
[1832] 0.0-30.0 sec 1.39 GBytes 398 Mbits/sec
[SUM] 0.0-30.0 sec 2.85 GBytes 814 Mbits/sec
Connecting on GigE internal lan
Without Ventrilo running
Code:
[1812] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49227
[1820] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49228
[ ID] Interval Transfer Bandwidth
[1820] 0.0-30.0 sec 505 MBytes 141 Mbits/sec
[1812] 0.0-30.3 sec 490 MBytes 136 Mbits/sec
[SUM] 0.0-30.3 sec 994 MBytes 275 Mbits/sec
With Ventrilo running on the server, client connecting from the other computer
Code:
[1848] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49243
[1832] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49244
[ ID] Interval Transfer Bandwidth
[1848] 0.0-30.3 sec 521 MBytes 144 Mbits/sec
[1832] 0.0-30.0 sec 469 MBytes 131 Mbits/sec
[SUM] 0.0-30.3 sec 989 MBytes 274 Mbits/sec
seems I need to tweak that laptop!!