View Single Post
Old 08-08-2012, 07:51 PM   #12
Prog-Rocker
just tryin to help
 
Join Date: Jul 2006
Location: Local Space/Time Continuum
Posts: 23,459
Default

ok, that's a problem with port 6100. here's some info and options to try:

[FONT=Verdana]Stuck on Synchronizing[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]When Ventrilo gets stuck on synchronizing this usually indicates that something is blocking the connection on Port 6100 UDP. This can be caused by firewall/virus applications on the pc or the router’s firewall. As a test, try temporarily disabling the firewall on the pc and/or router to see if Vent can connect. [/FONT][FONT=Verdana]Consult your product’s documentation and/or website for instructions.[/FONT][FONT=Verdana][/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Some users have reported that power resetting the router while vent is synchronizing allows UDP port 6100 data to pass thru.[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Exit all Vents[/FONT]
[FONT=Verdana]In all firewall/virus apps, remove all references to vent in all sections and then either manually re-add it to all ‘allowed’ list or restart vent and let the firewall add it back in.[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Try temporarily disabling SPI on the router (if available)[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Also check the router manufacturer’s website for any firmware updates[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]As another test, hook the pc directly to the modem (or DMZ port if you have a modem/router combo). If vent is able to connect then the problem is probably with the router.[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]More info on router SPI and port 6100 - [URL="http://ventrilo.com/forums/showpost.php?p=94794&postcount=2"]http://forum.ventrilo.com/showpost.php?p=94794&postcount=2[/URL][/FONT]
Prog-Rocker is offline   Reply With Quote