Ventrilo Tech Support - View Single Post

Initiilinside · 12-04-2007, 09:01 AM

Try this and see if it helps your case, it did mine. I wa having lots of problems with some being so loud that I couldn't understand what they were saying and some so soft I couldn't hear them.

Open the setup and click on SFX, under the Avaliable window select COmpressor and add it. Select properties and set the sliders as close as you can to the following:
Gain 18
Attack 0.01
Release 511
Threshold -30
Ratio 100
Pre delay 4.0
Click ok

This made ALL the users on VENTRILO the same volume to me, and brought those very loud down so I could understand them.
Hope this helps you too.

12-04-2007, 09:01 AM	#4
Initiilinside Junior Member Join Date: Dec 2007 Posts: 4	Try this and see if it helps your case, it did mine. I wa having lots of problems with some being so loud that I couldn't understand what they were saying and some so soft I couldn't hear them. Open the setup and click on SFX, under the Avaliable window select COmpressor and add it. Select properties and set the sliders as close as you can to the following: Gain 18 Attack 0.01 Release 511 Threshold -30 Ratio 100 Pre delay 4.0 Click ok This made ALL the users on VENTRILO the same volume to me, and brought those very loud down so I could understand them. Hope this helps you too.