Ventrilo Tech Support

Ventrilo Tech Support (http://forum.ventrilo.com/index.php)
-   Server (http://forum.ventrilo.com/forumdisplay.php?f=8)
-   -   Vent Server on Windows Server (variations) (http://forum.ventrilo.com/showthread.php?t=41299)

Prog-Rocker 01-08-2010 02:05 PM

Vent Server on Windows Server (variations)
 
I have installed the following versions of Windows Server and Ventrilo Server for testing. Ventrilo worked as expected with only a few rule changes in Windows Firewall.

[FONT=Verdana]Note: In all configurations only 1 NIC was enabled in the Operating Sytem.[/FONT]

Server 2008 x86 installed on an old Dell 4600, Intel P4 2.4GHz, 2GB

Server 2008 x64 installed on an HP Pavillion, AMD Athlon 64 X2 Dual Core 4600+, 4GB

Windows Home Server installed on an HP Pavillion, AMD Athlon 64 X2 Dual Core 4600+, 4GB

If you are having problems with any of these Operating Systems then please start a new thread explaining the issue.

Prog-Rocker 01-08-2010 02:05 PM

Windows Server 2008 x86
 
[FONT=Verdana]Windows Server 2008 x86[/FONT]

[FONT=Verdana]Standard Full-Installation with all Updates[/FONT]
[FONT=Verdana]All settings in “Default” state[/FONT]

[FONT=Verdana]Quick Firewall test – Server Manager / link: Go to Windows Firewall / link: Windows Firewall Properties / Public Profile tab / set Firewall State = Off / apply[/FONT]

[FONT=Verdana]Ventrilo Client running on the same PC (configured using “Localhost” as the server name) should connect without any problems.[/FONT]
[FONT=Verdana]Ventrilo Client running on a different PC will need to have the following firewall rules added.[/FONT]

[FONT=Verdana]Windows Firewall / Inbound Rules / New Rule / Port / TCP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>[/FONT]

[FONT=Verdana]Windows Firewall / Inbound Rules / New Rule / Port / UDP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>[/FONT]

Prog-Rocker 01-08-2010 02:05 PM

Windows Server 2008 x64
 
[FONT=Verdana]Windows Server 2008 x64[/FONT]

[FONT=Verdana]Standard Full-Installation with all Updates[/FONT]
[FONT=Verdana]All settings in “Default” state[/FONT]

[FONT=Verdana]Quick Firewall test – Server Manager / link: Go to Windows Firewall / link: Windows Firewall Properties / Public Profile tab / set Firewall State = Off / apply[/FONT]

[FONT=Verdana]Ventrilo Client running on the same PC (configured using “Localhost” as the server name) should connect without any problems.[/FONT]
[FONT=Verdana]Ventrilo Client running on a different PC will need to have the following firewall rules added.[/FONT]

[FONT=Verdana]Windows Firewall / Inbound Rules / New Rule / Port / TCP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>[/FONT]

[FONT=Verdana]Windows Firewall / Inbound Rules / New Rule / Port / UDP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>[/FONT]

Prog-Rocker 01-08-2010 02:07 PM

Windows Home Server
 
[FONT=Verdana]Standard Full-Installation with all Updates[/FONT]
[FONT=Verdana]All settings in “Default” state[/FONT]
[FONT=Verdana] [/FONT]
[FONT=Verdana]Upon starting the Ventrilo Server program the Windows Firewall will popup a message stating that “ventrilo_srv” has been blocked. There will be an option to “Unblock” the Ventrilo Server. Click on the “Unblock” button to allow network access.[/FONT]


All times are GMT -5. The time now is 03:07 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.