Server help, i got screens
 

Alright i followed the setup sticky and need some help here are my screens.
[URL]http://i66.photobucket.com/albums/h277/ms52390/ScreenShot-1.jpg[/URL]
[URL]http://i66.photobucket.com/albums/h277/ms52390/ScreenShot.jpg[/URL]
[URL]http://i66.photobucket.com/albums/h277/ms52390/ScreenShot1.jpg[/URL]

Any help i would love, thanks

Don't use "Both" - use separate entries for TCP and UDP.

ok, i made a entry for both, still not working thanks.

Was there a specific reason you suggested that?

In what way isn't it working?

Can you not:
- Start server
- Connect to server internally (within network)
- Connect to server externally (from internet)

i can start the server fine, and i can connect using my pc, but nobody from outside can.

Sorry, I should have guessed that with all the NAT related pics above.

Right, I have plugged your WAN IP from your router page, along with port 3784 into the status page [URL]http://www.ventrilo.com/status.php[/URL]
and it gave the status of your server (it has the name Bomb Vent just for confirmation). This at least means that the UDP side is being routed correctly. Make sure the TCP is written correctly, and after that, make sure the people on the outside are indeed trying to use the correct IP that you have on your WAN page with the default port of 3784.

Alright i set the TCP part right now ill just confirm the ip with the external user, thanks

i lost my tester :( can some1 try it for me? 72.74.91.242 port 3784

Start the server and I'll have a go