Ventrilo Tech Support  

Go Back   Ventrilo Tech Support > Main Category > Server

Reply
 
Thread Tools Display Modes
Old 02-03-2009, 06:06 AM   #1
nikolas
Junior Member
 
Join Date: Feb 2009
Posts: 2
Default Connecting to my vent 3.0.3

Hi
I'm new vent user and i try to install my own public server on clean WinXp machine.
there no antivirus and firewall install
I install the server and leave the INI file as is
I check the server with
"ventrilo_status -c2 -t127.0.0.1:3784"
And received:
"NAME: wow 1
PHONETIC: wow 1
COMMENT:
AUTH: 0
MAXCLIENTS: 8
VOICECODEC: 0,GSM 6.10
VOICEFORMAT: 1,11 KHz%2C 16 bit
UPTIME: 5
PLATFORM: WIN32
VERSION: 3.0.3
CHANNELCOUNT: 0
CLIENTCOUNT: 0
"
I telnet the server and get connected accepted .

So far so good
Now
In the same machine I install the client and try to connect.
I open user and server (Ip and hostname… )
And fail to connect I always receive the :
"MSG: Contacting server"
I try to google it out but no lack
Any can help me to resolve this issue ???
p.s
I successfully connected to anther vent server

Thanks


nikolas is offline   Reply With Quote
Old 02-03-2009, 09:57 AM   #2
Prog-Rocker
just tryin to help
 
Join Date: Jul 2006
Location: Local Space/Time Continuum
Posts: 23,463
Default

did you configure portforwarding on the router? - http://ventrilo.com/forums/showthread.php?t=17761



Testing Local Connection

For PC’s connecting on the same LAN as the server:
If you’re connecting the client from a different PC than the server then configure the client to use one of the internal ipaddresses of the server for the servername.

If you’re running the client on the same PC as the server then use 127.0.0.1 or “localhost” as the servername.

Most home routers will not loopback a connection if you specify the external ipaddress or hostname.
Prog-Rocker is offline   Reply With Quote
Old 02-04-2009, 04:40 AM   #3
nikolas
Junior Member
 
Join Date: Feb 2009
Posts: 2
Default

Thanks
My problem is to test the server on my local machine:
Clean Windows Xp Sp2 (Without Antivirus or Firewall installed )
I tested with telnet: "\telnet 127.0.0.1 3784"
And get acknowledge from server:
"MSG_CONN: ID 1, IP 127.0.0.1, Accepted"
And I check the server with:
"ventrilo_status -c2 -t127.0.0.1:3784"
And status was ok

Only with the vent client 3.0.4 on the same machine after I configure the server as 127.0.0.1 or "localhost" port 3784.
I receive: "MSG: Contacting server"
I check the server log and nothing (so is the client log ) ..
Post of the server.ini
"
[Server]
Name=Server3784
Phonetic=Server3784
Auth=0
Duplicates=1
AdminPassword=
Password=
SendBuffer=0
RecvBuffer=0
Diag=0
LogonTimeout=10
CloseStd=1
TimeStamp=0
PingRate=10
ExtraBuffer=0
ChanWidth=0
ChanDepth=0
ChanClients=0
DisableQuit=0
VoiceCodec=0
VoiceFormat=1
SilentLobby=0
AutoKick=0
nikolas is offline   Reply With Quote
Old 02-04-2009, 11:03 AM   #4
Prog-Rocker
just tryin to help
 
Join Date: Jul 2006
Location: Local Space/Time Continuum
Posts: 23,463
Default

can you connect your client to this test server:

frost.pure-voice.net
port=3784
Prog-Rocker is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.