Ventrilo Tech Support  

Go Back   Ventrilo Tech Support > Main Category > Windows Client

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-20-2007, 06:15 AM   #1
binded
Junior Member
 
Join Date: Nov 2007
Posts: 2
Default Anyone else using a Cisco and getting MSG: Contacting Server?

Hello all,

Since the release of 3.0 i've been having difficulty connecting to any vent server.

I'm using a Cisco 4500 Router and so far I've done the following:

access-list 100 remark Vent
access-list 100 permit udp any any eq 6100
access-list 100 permit udp any any eq 5000
access-list 100 permit udp any any eq 3106 - Vent Server Port
access-list 100 permit tcp any any eq 3106 - Vent Server Port

I'm still hanging at MSG: Contacting Server.

I even went so far as to remove my entire access-list 100 and that fixed the issue but I can't figure out what's causing the connect issue with my access list.

Here's some other settings on my access-list for reference:

access-list 100 remark allow pings into the network
access-list 100 permit icmp any any echo
access-list 100 remark allow ping responses
access-list 100 permit icmp any any echo-reply
access-list 100 remark allow ICMP source-quench
access-list 100 permit icmp any any source-quench
access-list 100 remark allow path MTU discovery
access-list 100 permit icmp any any packet-too-big
access-list 100 remark allow time-exceeded, which is useful for traceroute
access-list 100 permit icmp any any time-exceeded
access-list 100 remark deny all other ICMP packets
access-list 100 deny icmp any any
access-list 100 remark DNS
access-list 100 permit udp host xx.xx.xx.xx eq domain any gt 1023
access-list 100 permit udp host xx.xx.xx.xx eq domain any gt 1023
access-list 100 remark Permit Established connections
access-list 100 permit tcp any any established
access-list 100 remark Permit Internal DNS Out
access-list 100 permit udp any eq domain any

Since leaving my Router completely open the world isn't an option, does anyone here have a solution for this or any advise?

BTW: I've recently upgraded to 3.0.1 and I'm still having the same issue.

This is NOT a problem with the Vent Server not being upgraded just FYI.

Thanks ahead of time.

Last edited by binded; 11-20-2007 at 06:17 AM.
binded is offline  
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 02:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.