Ventrilo Tech Support  

Go Back   Ventrilo Tech Support > Main Category > Server

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-19-2018, 02:28 PM   #1
paulperrone
Junior Member
 
Join Date: Jan 2018
Posts: 1
Default Special Application of Server

I am a Ham Radio operator and I use Ventrilo in a non gaming way. Specifically, I have a PC connected to my Ham radio transceiver and also run Ventrilo server on this PC. The sound card interface on the PC connects to the radio. This arrangement allows other client users to talk over my radio. I have a few elderly friends who are Hams but live in nursing homes and can not install a radio. This arrangement allows them to use my radio.

Here is the problem. A radio requires a push to talk (PTT) switch to be energized to turn on the transmitter. My work around is to set the radio up to operate in VOX (voice control) mode so it begins transmitting when it hears incoming audio from one of the client users. This works OK but has the inherent problems of VOX, such as drop out and hang time.

Is there some way to output from the server (say through the serial port) the fact that a client is transmitting (icon turns green). This output could then be used to key the PTT of the radio.

Any ideas are welcome!
paulperrone is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 05:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.