View Single Post
Old 08-08-2012, 07:51 PM   #12
Prog-Rocker
just tryin to help
 
Join Date: Jul 2006
Location: Local Space/Time Continuum
Posts: 23,452
Default

ok, that's a problem with port 6100. here's some info and options to try:

Stuck on Synchronizing

When Ventrilo gets stuck on synchronizing this usually indicates that something is blocking the connection on Port 6100 UDP. This can be caused by firewall/virus applications on the pc or the router’s firewall. As a test, try temporarily disabling the firewall on the pc and/or router to see if Vent can connect. Consult your product’s documentation and/or website for instructions.

Some users have reported that power resetting the router while vent is synchronizing allows UDP port 6100 data to pass thru.

Exit all Vents
In all firewall/virus apps, remove all references to vent in all sections and then either manually re-add it to all ‘allowed’ list or restart vent and let the firewall add it back in.

Try temporarily disabling SPI on the router (if available)

Also check the router manufacturer’s website for any firmware updates

As another test, hook the pc directly to the modem (or DMZ port if you have a modem/router combo). If vent is able to connect then the problem is probably with the router.

More info on router SPI and port 6100 - http://forum.ventrilo.com/showpost.php?p=94794&postcount=2
Prog-Rocker is offline   Reply With Quote