View Single Post
Old 07-25-2009, 05:23 AM   #7
mjgraf
Senior Member
 
mjgraf's Avatar
 
Join Date: May 2005
Location: Some say in my own little world
Posts: 15,502
Default

I have GigE and with the ventrilo client running I get the following using your commandline options.
I have a similar setup, server is running XP32bit, client I used is running Vista 32bit.

Connecting locally on the server, same with and without ventrilo running/connected
Code:
[1868] local 192.168.2.105 port 5001 connected with 192.168.2.105 port 3307
[1832] local 192.168.2.105 port 5001 connected with 192.168.2.105 port 3308
[ ID] Interval       Transfer     Bandwidth
[1868]  0.0-30.0 sec  1.45 GBytes   416 Mbits/sec
[1832]  0.0-30.0 sec  1.39 GBytes   398 Mbits/sec
[SUM]  0.0-30.0 sec  2.85 GBytes   814 Mbits/sec
Connecting on GigE internal lan
Without Ventrilo running
Code:
[1812] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49227
[1820] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49228
[ ID] Interval       Transfer     Bandwidth
[1820]  0.0-30.0 sec   505 MBytes   141 Mbits/sec
[1812]  0.0-30.3 sec   490 MBytes   136 Mbits/sec
[SUM]  0.0-30.3 sec   994 MBytes   275 Mbits/sec
With Ventrilo running on the server, client connecting from the other computer
Code:
[1848] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49243
[1832] local 192.168.2.105 port 5001 connected with 192.168.2.108 port 49244
[ ID] Interval       Transfer     Bandwidth
[1848]  0.0-30.3 sec   521 MBytes   144 Mbits/sec
[1832]  0.0-30.0 sec   469 MBytes   131 Mbits/sec
[SUM]  0.0-30.3 sec   989 MBytes   274 Mbits/sec
seems I need to tweak that laptop!!

Last edited by mjgraf; 07-25-2009 at 05:27 AM.
mjgraf is offline