Ventrilo Tech Support

Ventrilo Tech Support (http://forum.ventrilo.com/index.php)
-   Macintosh Client (http://forum.ventrilo.com/forumdisplay.php?f=6)
-   -   Plantronics 995 voice activation not working (http://forum.ventrilo.com/showthread.php?t=46496)

alainf7313 02-23-2011 04:48 PM

Plantronics 995 voice activation not working
 
I can use PTT just fine, voice is clear and loud. i used diferente sensitivity and nothing. No sensitivity works. If i use PTT, works fine.

Using Intel Mac 10.6.6
Plantronic Audio 995 usb wireless

Voice activation mode works with my other headphones that plug into the jack.

Everyone works perfectly except the voice activation mode. When I log into vent my speaker goes green and is permanently on.

Please help me, i hate using PTT....

alainf7313 02-24-2011 02:09 PM

Can someone please help?????

Jaycyn 02-25-2011 12:38 PM

The sensitivity setting controls the Vent software, not the device itself. So if changing the sensitivity isn't having an affect, then there's something else going on - probably another setting that is interfering.

It sounds to me like the mic is picking up background noise, which is keeping it on

In the Vent Setup, Voice Tab, the Use PTT Checkbox should be unchecked.
sound input popup should be set to Plantronics and line input set to about 1/2 way.

Click OK and see if your Speaker icon is green. If so, go back into the settings and turn your line input slider down to Min, click OK and try again.

finally, if that still doesn't help. go to your system preferences->Sound->input tab and set the Input Volume slider to minimum (all the way to the left. Close the system preferences, restart and try vent again.

Let us know.

azizmandar 04-19-2011 09:01 AM

My GF just got the 995 wireless and I have the G930 and under windows 7 64 they both have this issue. As far as I can tell this is because Ventrilo reports Abs Zero as max volume and both of these wireless headsets report Abs Zero when not picking up sound. I'm not sure if this is an issue with other wireless headsets but it would be nice if Vent had an option to accept Abs Zero as 0 and not some positive integer.


All times are GMT -5. The time now is 04:21 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.