Ventrilo Tech Support

Ventrilo Tech Support (http://forum.ventrilo.com/index.php)
-   Server (http://forum.ventrilo.com/forumdisplay.php?f=8)
-   -   Vent Server on Windows Server (variations) (http://forum.ventrilo.com/showthread.php?t=41299)

Prog-Rocker 01-08-2010 02:05 PM

Vent Server on Windows Server (variations)
 
I have installed the following versions of Windows Server and Ventrilo Server for testing. Ventrilo worked as expected with only a few rule changes in Windows Firewall.

Note: In all configurations only 1 NIC was enabled in the Operating Sytem.

Server 2008 x86 installed on an old Dell 4600, Intel P4 2.4GHz, 2GB

Server 2008 x64 installed on an HP Pavillion, AMD Athlon 64 X2 Dual Core 4600+, 4GB

Windows Home Server installed on an HP Pavillion, AMD Athlon 64 X2 Dual Core 4600+, 4GB

If you are having problems with any of these Operating Systems then please start a new thread explaining the issue.

Prog-Rocker 01-08-2010 02:05 PM

Windows Server 2008 x86
 
Windows Server 2008 x86

Standard Full-Installation with all Updates
All settings in “Default” state

Quick Firewall test – Server Manager / link: Go to Windows Firewall / link: Windows Firewall Properties / Public Profile tab / set Firewall State = Off / apply

Ventrilo Client running on the same PC (configured using “Localhost” as the server name) should connect without any problems.
Ventrilo Client running on a different PC will need to have the following firewall rules added.

Windows Firewall / Inbound Rules / New Rule / Port / TCP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>

Windows Firewall / Inbound Rules / New Rule / Port / UDP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>

Prog-Rocker 01-08-2010 02:05 PM

Windows Server 2008 x64
 
Windows Server 2008 x64

Standard Full-Installation with all Updates
All settings in “Default” state

Quick Firewall test – Server Manager / link: Go to Windows Firewall / link: Windows Firewall Properties / Public Profile tab / set Firewall State = Off / apply

Ventrilo Client running on the same PC (configured using “Localhost” as the server name) should connect without any problems.
Ventrilo Client running on a different PC will need to have the following firewall rules added.

Windows Firewall / Inbound Rules / New Rule / Port / TCP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>

Windows Firewall / Inbound Rules / New Rule / Port / UDP – Specific Local Port = 3784 / Allow Connection / (all profiles selected) / <assign unique name>

Prog-Rocker 01-08-2010 02:07 PM

Windows Home Server
 
Standard Full-Installation with all Updates
All settings in “Default” state

Upon starting the Ventrilo Server program the Windows Firewall will popup a message stating that “ventrilo_srv” has been blocked. There will be an option to “Unblock” the Ventrilo Server. Click on the “Unblock” button to allow network access.


All times are GMT -5. The time now is 06:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.