Ventrilo Tech Support

Ventrilo Tech Support (http://forum.ventrilo.com/index.php)
-   Windows Client (http://forum.ventrilo.com/forumdisplay.php?f=4)
-   -   Announce User (phonically) (http://forum.ventrilo.com/showthread.php?t=3878508)

jglazer 05-25-2017 01:53 PM

Announce User (phonically)
 
I know Vent has this ability but I cannot seem to get it to say "TOM HAS JOINED CHANNEL" when Tom joins the channel. I know there are settings in the user manager but I have no users there. Its a public server and no accounts are created.

Is there a way to set this up on a global basis?

Prog-Rocker 05-25-2017 03:12 PM

all TTS events are handled by your local OS TTS engine. make sure you have the vent event set correctly

goto setup > events tab > change 'users switch channels" to text-to-speech. clik the play button to test

the tts engine will attempt to pronounce the user name correctly. if it doesn't then the other user needs to set the proper phonetic in their client setup. goto 'user name' and enter the pronunciation in the phonetic box.

mariad 06-20-2017 05:56 AM

Thank you for the step guide. Will be helpful to me as well.

mariad 06-29-2017 08:20 AM

I followed the settings you mentioned. But most of the time it reverts back to the original issue. Any help on that.

Prog-Rocker 06-29-2017 01:18 PM

check for these settings too:

hilite channel > rt-clik > channel admin > info > disable sound events (unchecked)

client setup > binds/speech tabs > output device set same as voice tab. (all event sounds are sent to this device)

client setup > misc tab > uncheck 'silent connections when in a channel'

windows ctrl-panel > speech recognition > text-to speech link (on left side window) > test

sotheahy 07-13-2017 08:59 PM

I know there are settings in the user manager but I have no users there. Its a public server and no accounts are created.

สูตรบาคาร่า

:p:p


All times are GMT -5. The time now is 06:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.